How well do you know fiber optic cables? If you don’t have a lot of details about the cables here are a few facts that you should find out about them. Although an Optical Fiber Coloring Machine is manufactured out of glass plus some of its areas require lots of care, a total fiber is made such that it’s capable of withstand even the most rugged installations. For instance, cat 5/5e/6/6A has a pulling tension of 25 pounds. There are many optics that can withstand over 200 pounds of pulling tension.
Research research indicates that a fiber optic can withstand higher pulling tension than copper. Additionally, it’s rated for larger temperature ranges and it is immune to EM/RFI interference.
Fiber Is Much More Secure
Since information is carried within the cable, the information is more secure than in other cables; therefore, it’s difficult to hack the details. While it’s challenging to hack the details inside the cables, it doesn’t mean that they can’t be hacked. The reason being all that you should do is to have the network tap and physical accessibility cable and you will be able to hack it.
It’s Very easy to Install The Cable
As the cable was challenging to install some time ago, things have changed now as technologies have changed. If you want to install the cable you only have to contact installation professionals and also the cable will be installed inside a very limited time.
The Cables Aren’t Afflicted With Environmental Conditions
Since the fibers carry light, they aren’t disturbed by changes in temperature, cold, rain or any other environmental condition. This is not the case with copper cables which are usually impacted by environmental conditions. For example, when it’s cold, the cables transmit data considerably faster than when it’s hot.
They Support Wireless
The cables are heavily employed by telecommunication companies to carry wireless telephone signals from the towers for the central network. The fibers are preferred by most companies because of their large bandwidth and long lasting compatibility using the network equipment.
Much like copper cables, NEC (National Electrical Code) requires Secondary Coating Line be marked with their fire and smoking ratings. NEC requires all indoor fiber cables be marked correctly and installed properly for the intended use. According to NEC, a building’s inside area is split into three types of sections: plenums, risers and general purpose areas.
A Plenum area is really a building space employed for air-flow or air distribution system. Generally in most buildings, the area above a drop ceiling or within raised floor can be used as the air return (way to obtain air) for the air cooling. Those drop ceiling and raised floors will also be where fiber cables tend to be installed. If those cables were burning, they could give off toxic fumes and also the fumes could be fed to the rest of the building through the air conditioning unit. Consequently, people may be injured even though they are a long way from the fire.
These are among the facts that you need to know about optic cables. When choosing the units you should ensure that you purchase them from authorized dealers. After buying them you should ensure that you install them professionally. If you don’t hold the skills you should hire a skilled professional to put in them for you. We manufacture different eygmcn of optic fiber cable equipment such as Optical cable sheathing line and several other equipment. Go to the given links to know a little more about us.
When performing fusion splicing you may need a Fusion Splicer, fusion splice protection sleeves, and isopropyl alcohol and stripping tools. If you work with a mechanical splice, you will need stripping tools, mechanical splices, isopropyl alcohol along with a mechanical splice assembly tool. When hand terminating a fiber you will require 99% isopropyl alcohol, epoxy/adhesive, a syringe and needle, polishing (lapping) film, a polishing pad, a polishing puck, a crimp tool, stripping tools, fiber optic connectors ( or splice on connectors) and piano wire.
Each time a termination is finished you need to inspect the final face in the connector with Secondary Coating Line. Making sure that light is getting through either the splice or perhaps the connection, a Visual Fault Locator can be utilized. This device will shoot a visible laser down the fiber cable so that you can tell there are no breaks or faulty splices. If the laser light stops on the fiber somewhere, there is most probably an escape inside the glass when this occurs. If you have over a dull light showing in the connector point, the termination was not successful. The lighting also needs to pass through the fusion splice, if it will not, stop and re- splice or re-terminate.